Skip to content

3 Regulations to Follow when you are Planning to Install a Balustrade

A balustrade is a vertical upstand which guards users of a building next to a vertical displacement between horizontal building facades or on the side of a stair.

As relevant as they are for our protection, we do take balustrades for granted. We may like their appearance, but while using a handrail for a guide on stairs or while tending against a balustrade on a terrace, we give light thought to the truth that it has to be high enough to fit an adequate barrier and sturdy sufficient to maintain our weight. We don’t demand to consider these things because government governing bodies now have, and contractors are obliged by law to adhere to balustrade laws and standards.

ballustrade installed in a pool

The conventional well-constructed balustrade can decline to adhere to BCA standards over time. One of the more frequent difficulties is the utilization of flooring over the top of an existing floor. BCA laws declare that the balustrade must be 1 meter or higher than the finished basement. Renovators usually tile or carpet floors without speculating about the reality that their flooring material increases the level of the polished floor without improving the level of the balustrade.

By law, a balustrade or other barrier must be constructed wherever the difference in height within one floor or surface is greater than one meter from a next-level or surface.

BCA regulations declare that a balustrade must:

  • Be at least 1 meter high as measured from the finished floor;
  • Have breaks between risers or post no higher than 125mm; and
  • Be able to resist loads and impacts as defined by AS 1170.1

The length law of 1 meter assures the balustrade is high. Enough to provide restraint against stumbling over the balustrade. The breaks between risers or posts set higher than 125mm to restrict children from dropping between them. Load and impact ordinances are intended to ensure balustrades can withstand impact or will not fail when pressure is applied to them from any place.

Time can consider its toll on the supplies and fixings that make such semi frameless balustrades safe. If a timber balustrade becomes precarious, it may be because some of the timber has decayed or because fixings have corroded or come unfastened. Concrete balustrades can undergo “concrete cancer” and pressure wire installed in posts can grow slack.

These purpose loads are designed to assure that the barrier is firm enough to resist a person falling into it without falling (point part) and well rigid and robust enough not to collapse should somebody lean into the barrier (distributed load). The handrail must also be able to resist wind loads, mainly where a solid decoration is used externally

Balustrade laws and standards apply to all balustrades, not just the installation of new ones. The rules are there for a reason: to protect people from risk. If you’ve been considering your balustrades for granted, now is the time to have them investigated. The improvements you do now can avert critical damage tomorrow.

If you have questions and inquiries about balustrades, feel free to visit Pool Fencing Perth. 

Pool Fencing Perth

Leave a Comment